Na'urar Na'urar Na'ura mai Inganci ta Pneumatic
fasali
1.Industrial sa, mai iko ga nauyi wajibi aikace-aikace.
2.High durability direba da kuma m ga dogon rai.
3.Rapid harbe-harbe zane, babban gudun aiki.
aikace-aikace
Ana amfani da pallets, kwalaye da akwatuna, shinge, marufi, da dai sauransu.
m masana'antu Categoty
Katifa, Fence, Pet keji, Noma keji, Waya net, Manyan furniture,
Tufafi, Yin Takalmi, da dai sauransu
siga
| Samfura | Nauyi (kg) | Tsawon (mm) | Nisa (mm) | Tsayi (mm) | Iyawa (pcs/nadi) | Matsin iska (psi) |
| Farashin CN55 | 2.75 | 270 | 131 | 283 | 300-400 | 6-8kgf/cm2 |
| Saukewa: CN70B | 3.8 | 336 | 143 | 318 | 225-300 | 6-8kgf/cm2 |
| Saukewa: CN80B | 4.0 | 347 | 137 | 348 | 300 | 6-8kgf/cm2 |
| Farashin CN90 | 4.2 | 270 | 131 | 283 | 300-350 | 8-10kgf/cm2 |
| Farashin CN100 | 5.82 | 405 | 143 | 403 | 225-300 | 8-10kgf/cm2 |
umarnin don aiki
1.OPERATION Saka gilashin aminci ko gilashin haɗari ga idanu koyaushe yana kasancewa saboda yuwuwar ƙurar da iska ta ƙare ko ta tashi sama saboda rashin sarrafa kayan aikin.Don waɗannan dalilai, gilashin tsaro ko gilashin tsaro za su kasance koyaushe yayin aiki da kayan aiki. Dole ne ma'aikaci da / ko mai amfani su tabbatar da cewa an sa kariyar ido mai kyau. Kayan aikin kare ido dole ne su dace da buƙatun Cibiyar Matsayi ta Amurka,ANSIZ87.1 (Dokar Majalisar 89/686/EEC na 21 DEC.1989) da ba da kariya ta gaba da ta gefe.Ma'aikaci yana da alhakin tilasta yin amfani da kayan kariya na ido ta ma'aikacin kayan aiki da duk sauran ma'aikata a wurin aiki.NOTE: Hotunan da ba na gefe ba da garkuwar fuska kadai ba sa samar da isasshen kariya.Tsare hannaye da jiki su samar da hanyar fitar da fitarwa yayin tuki masu ɗaure saboda haɗari na bugun hannu ko jiki bisa kuskure.2.LOADING NA FASHI (1)Bude mujallar Ja da lanƙolin kofa ka buɗe kofa.(2) Bincika daidaitawa Ana iya matsar da tallafin ƙusa sama da ƙasa zuwa saiti huɗu.Don canza saiti ja kan post ɗin kuma karkatar da matakin daidai.Ya kamata a daidaita tallafin ƙusa daidai zuwa matsayin da aka nuna a cikin inci da millimita a cikin mujallar.(3)Lokacin ƙusa Sanya ƙusoshi a kan post ɗin da ke cikin mujallar.Cire ƙusa isassun kusoshi don isa ga pawl ɗin abinci, kuma sanya ƙusa na biyu tsakanin haƙora a kan tafarfin ciyarwa.Kawukan ƙusa sun dace da ramin kan muzzle.(4) Rufe murfi.Rufe kofar.Duba wannan latch ɗin. (Idan adadin bai shiga ba, duba cewa kawunan ƙusa suna cikin ramin kan muzzle).3.TEST OPERATION Daidaita karfin iska a 70p.si (5 mashaya) kuma haɗa kayan aikin iska.Ba tare da taɓa faɗakarwa ba, danne aminci a kan gunkin aikin. Ja da fararwa.Tare da kayan aiki kashe aikin-yanki, ja da jawo. Sa'an nan kuma raunana aminci a kan kayan aiki. da taurin kayan aiki.
aiki
Hanyar da aka saba amfani da ita akan ''Contact Trip〞kayan aikin shine mai aiki ya tuntuɓi aikin don kunna tsarin tafiyar yayin da ake ci gaba da jan abin da ke jan wuta, don haka tuƙi na'ura a duk lokacin da aka tuntuɓi aikin.
Duk kayan aikin pneumatic suna fuskantar koma baya yayin tuki fasteners. Kayan aikin na iya billa, sakin tafiya, kuma idan ba da gangan ba an ba da izini don sake tuntuɓar farfajiyar aikin tare da faɗakarwa har yanzu yana kunna (yatsa har yanzu yana riƙe da jawo) za a kora na'urar ta biyu maras so.
